Table of Contents
Advertisement
2. Startup
2.2
Startup on the DeviceNet
2.2.1 General remarks
Festo P.BE-CDVI-DN-EN en 0805a
Note
– The Festo valve terminal of type CDVI-DN can be used at
all DeviceNet masters.
– This chapter describes the configuration and startup by
the example of Allen-Bradley controllers.
The following special features should be observed when
using the CDVI valve terminal on the DeviceNet:
–
The I/O addresses of all identified DeviceNet stations can
be assigned freely as M-file addresses or as discrete I/Os
in the scan list.
–
The address assignment of a network station is usually
made in ascending sequence.
–
The input and output addresses can be assigned indepen-
dently of each other.
Note
Assign the I/O addresses of the network stations so that
sufficient reserve is available for subsequent extensions.
The following sections contain general instructions for the
configuration of a valve terminal on the DeviceNet.
Detailed information can be found in the documentation or
help function of your configuration program.
2-7
Advertisement
Chapters
Table of Contents
