1. Installation
1.1
General installation instructions
Festo P.BE-CDVI-DN-EN en 0805a
Warning
Uncontrolled movements of the connected actuators and
uncontrolled movements of loose tubing may cause per-
sonal injury or material damage.
Before any conversion work on the CDVI-DN, switch off
•
the following:
– Compressed air supply
– Power supply
Make sure no control signals from the higher-order con-
•
troller are present at the solenoid coils.
Note
Observe the CDVI assembly instructions in the "CDVI
pneumatics manual" (CP.BE-CDVI-...) in chapter 2.
The CDVI-DN contains electrostatically sensitive devices.
Do not therefore touch any electronic components.
•
Observe the handling specifications for electrostatically
•
sensitive devices.
They will help you avoid damage to the electronics.
1-3