Contents and general safety instructions
Target group
Service
Notes on this manual
Festo P.BE-CDVI-DN-EN en 0805a
Warning
If the valve terminal is to be used as explosion-proof
equipment, make sure:
Electrical connections are not disconnected under
•
voltage.
The completely installed valve terminal with all the
•
plugs, adapters and protective caps used complies
at least with protection class IP65.
This manual is intended exclusively for technicians trained in
control and automation technology who have experience in
installing, commissioning, programming and diagnosing sta-
tions on the DeviceNet.
Please consult your local Festo repair service if you have any
technical problems.
This manual contains specific information on installing,
commissioning, programming and diagnosing CDVI valve
terminals with direct connection for DeviceNet.
Information on the pneumatics can be found in the
"Pneumatics manual, P.BE-CDVI-...."
VII