Table of Contents
Advertisement
Depth Stop Tube Assembly
1. Attach the depth stop mount plate to the lift using
3/8-16 x 1-1/4 hex head cap screws and hex lock
nuts.
2. Lay the depth stop tube assembly on top of the
center frame. Insert a 5/8-11 x 2-1/2 hex head cap
screw in the rear hole of the tube assembly from the
left side (See Figure 3-4.) Insert the screw through
the depth stop mounting plate on the center lift and
secure with a 5/8-11 hex lock nut.
ASSEMBLY INSTRUCTIONS
IMPORTANT
It may be necessary to leave these screws loose to
attach the valve hoses later.
3-9
Advertisement
Table of Contents
