Table of Contents
Advertisement
Disc Gang Installation
NOTE
See Figures 2-1 thru 2-3 for disc gang placement.
Disc blades are extremely sharp. Exercise
extreme care when working on or near disc
blades. Do not allow disc to roll over or fall onto
any body part. Do not allow wrenches to slip
when working near disc blades. Never push
wrenches toward disc blades. Do not climb over
machine above disc blades. Failure to stay clear
of disc blade edges can cause serious personal
injury or death.
1. Assemble the disc gang assemblies to the frame
using clamp plates, 3/4-10 x 2 grade 8 hex head cap
screws, and hex lock nuts (See Figure 3-5.)
DANGER
ASSEMBLY INSTRUCTIONS
3-11
Advertisement
Table of Contents
