Appendix
16
Appendix
Emission measurements
HF emissions as
per CISPR 11
HF emissions as
per CISPR 11
Harmonics
IEC 61000-3-2
Voltage fluctuations /
Flicker
IEC 61000-3-11
72/84
16.1
16.1.1
The Tanning system has been designed for use in the electromagnetic envi-
ronment specified below. The device operator must ensure that it is used in
such an environment.
Conformity Electromagnetic environment – Guidelines
Group 1
Model-No.: JK 98 / 48-0 uses HF power mostly for internal functions.
Therefore the HF emissions are very low and it is highly unlikely that it
will cause any interference to adjacent electronic equipment.
Class B
Model-No.: JK 98 / 48-0 has been designed for use in all devices, includ-
ing those in residential areas, and it has been determined that it can be
used for residential purposes as soon as it is connected up to a public
mains supply that also supplies buildings.
Class A
Fulfilled
The obligations listed in Sub-section 6.2.2 of EN 61000-3-11:2000 must
be taken into consideration. In particular, the 0.14 ohm line impedance
must be guaranteed.
Model-No.: JK 98 / 48-0:
EMC information
Table 201: Guidelines and manufacturer's
declaration – Electromagnetic emissions