Function Description; Transport; Installation Location - ergoline SUNRISE 480 Turbo Power Operating Instructions Manual

06/2018 1019683-00
3.6

Function description

The primary technical components of a tanning device are an artificial source
of UV radiation, a variety of filters and reflectors as well as a mechanical
structure with a defined active surface.
Different tanning results can be achieved in varying strength tanning devices.
This is due to the different strength UV lamps and the different UV-A and UV-
B proportions of the UV radiation. The UV-A proportion primarily generates a
superficial tan, which appears rapidly and is intensive but also fades more
rapidly, the UV-B radiation is primarily responsible for more long-term tanning
results. The disadvantage of the UV-B radiation is that the tan does not be-
come visible until one or two days after visiting the tanning salon. Therefore,
the appropriate tanning device is to be selected depending on the desired
tanning goal.
The tanning devices described here exclusively emit UV-A radiation.
Vibra Shape (additional feature)
The additional feature Vibra Shape, which can be used additionally, activates
the entire muscular system through its vibrations.
Information about the Vibra Shape feature can be found in the separate doc-
ument 'OI Vibra Shape #1016215-..' which is provided in the Technical Doc-
umentation folder.
3.7

Transport

3.8

Installation location

You may find detailed information on installation and setting up in the Installa-
tion Instructions (see folder Technical Documentation).
What this device is
Operating instructions – 15/84