Ventilation; Setup Location - ergoline SUNRISE 480 Turbo Power Operating Instructions Manual

What this device is
16/84
3.8.1

Ventilation

Danger of failure!
Danger of overheating by obstruction of the air routing.
– Observe the ventilation information to avoid serious system malfunctions.
You can obtain data regarding the air supply and ventilation from the custom-
er service department (see page 2).
3.8.2

Setup location

Sudden movements and malfunctions!
Crushing hazard.
– The device is not suitable for operation in mobile facili-
ties (ships, buses, trains). Adaptation of the unit is re-
quired in order to guarantee trouble-free operation
when used in mobile facilities.
Danger of overheating by obstruction of the air routing!
Any liability is excluded in case of damage or injury proven
to be the result of the use of non-genuine spare parts.
Use of non-compliant lamps voids warranty and risks injury!
– Do not change, obstruct or block the air inflow and
outflow area to the device or make any unauthorized
changes to the device. The manufacturer shall bear no
liability for damage or injuries resulting from such ac-
tions.
– Observe the ventilation information to avoid serious
system malfunctions.
– Before putting a device into operation, the transport
pallet must be removed from under the device. Danger
of overheating by obstruction of the air routing.
– Maintain the minimum distances from the walls! Dimen-
sions are given on page 25.
– Only use OEM spare parts of the same type! The use of
other parts will void the manufacturer's warranty!
NOTICE
WARNING!
CAUTION!