Cleaning The Air Intake Openings - ergoline SUNRISE 480 Turbo Power Operating Instructions Manual

How to use this device
66/84
Venting
NOTE:
Ventilate after changing the canister by switching over to
preset mode and then select Function 231 (see ''Presettings'',
order no. 1011803-..).
– Close the door.
– Then test the AQUA SYSTEM in test mode. In test mode, the nozzles
spray for 3 seconds. Repeat the ventilation process if it does not work.
The system will now be ventilated for 1 minute. AQUA SYSTEM liquid will be
released from the nozzles during this period.
– Test the AQUA SYSTEM function afterwards. Repeat the ventilation
process if it does not work.
12.16.18

Cleaning the air intake openings

Not applicable for this device.