Instructions For Replacing The Lamps - ergoline SUNRISE 480 Turbo Power Operating Instructions Manual

06/2018 1019683-00
12.16.4

Instructions for replacing the lamps

Danger of burns from hot lamps and device parts!
If the tanning device was operated before being switched off
and opened, lamps and housing parts may be hot.
– Before replacing lamps or other spare parts, wait
until lamps and metal parts of the device have
cooled down sufficiently.
NOTE:
Small quantities of mercury can escape if the bulb/lamp glass
breaks! Please comply with the following instructions:

Immediately disconnect the device from the mains
power.

Children must leave the room immediately.

Ventilate the room for at least 15 minutes.

Put on disposable gloves.

With the window open: Collect the glass shards and
escaped mercury in a sealable container.

Take the container to a collection site for waste lamps.
Changing the chip card
Not applicable for this device.
How to use this device
WARNING!
Operating instructions – 57/84