Related Manuals for ergoline Beauty Angel 7200
Summary of Contents for ergoline Beauty Angel 7200
- Page 1 Operating instructions Ergoline Beauty Angel 7200 Model-No.: JK 158 / BA 32-0 VS 1019179-00A / us / 09.2018...
-
Page 2: Table Of Contents
Table of Contents WARNING! This device is designed for use with NON-UV emitting lamps only! Use of UV lamps, or any lamps other than those specified for use in this de- vice, may cause serious injury and is considered a violation of FDA regula- tions. - Page 3 Table of Contents Contact information Customer Service JK Products & Services 411 West Washington Avenue Suite B Jonesboro, Arkansas 72401 800-445-0624 870-935-9046 http://support.jkamerica.com Manufacturer JK-Products GmbH Rottbitzer Str. 69 53604 Bad Honnef GERMANY Tel.: +49 (0) 22 24 / 818-140 Fax: +49 (0) 22 24 / 818-166 WARNING! Read these operating instructions.
-
Page 4: Table Of Contents
Table of Contents Table of Contents What certain words and signs mean (Glossary) ......8 Definitions ..................8 Warning signs .................. 9 Symbols on the device ..............11 What this device is ..............13 Guidelines ..................13 Export .................... 13 Scope of delivery ................ - Page 5 Table of Contents What you must do to avoid other harm ........32 General ..................32 Beauty system ................32 Sensor ................... 32 Vibra Shape - vibration plate ............33 Foreseeable misuse ..............33 Obligations of the studio operator ..........34 Staff training ..................
- Page 6 Table of Contents 12.16.1 Technical modifications ..............58 12.16.2 Maintenance plan ................58 12.16.3 Cleaning and maintenance work preparation ....... 60 12.16.4 Instructions for replacing the lamps ..........61 12.16.5 Cleaning and disinfection of the sensor ......... 63 12.16.6 Cleaning or replacing lamps in the doors ........63 12.16.7 Cleaning or replacing lamps on the side walls ......
- Page 7 Table of Contents JK-Products, Inc. – Limited Warranty ........83 17.1 Limited Acrylic Warranty ............... 84 17.2 Warranty Claims ................85 17.2.1 Policy & Procedures ..............85 17.2.2 Labor Warranty Claim/Credit Procedures ........86 17.3 Limited Lifetime Warranty ............. 86 Index .....................
-
Page 8: What Certain Words And Signs Mean (Glossary)
What certain words and signs mean (Glossary) What certain words and signs mean (Glossary) Definitions Studio operator People who provide devices to users on a commercial basis. The studio op- erator is trained to operate and maintain the device and is responsible for the orderly operation of the device as well as compliance with the maintenance intervals. -
Page 9: Warning Signs
What certain words and signs mean (Glossary) Warning signs Danger notices, nonobservance will lead to death or serious injury: DANGER! Type and source of danger, e.g. 'DANGER – High volt- age!' Description of the consequences, e.g. 'You can be killed or injured by an electric shock!' Countermeasures: –... - Page 10 What certain words and signs mean (Glossary) NOTICE ESD-sensitive components! The word 'NOTICE' without warning sign points out that danger for devices, materials and the environment can be expected here. Countermeasures: – Avoid doing this. Important information: NOTE: This symbol does not identify safety notices, but states infor- mation for a better understanding of the processes.
-
Page 11: Symbols On The Device
What certain words and signs mean (Glossary) Symbols on the device The following symbols are displayed on the device: Manufacturer, company address Type BF applied part Follow Operating Instructions. Where there are great differences in temperature between the transport route and the installation site the device may not be put into operation immediately after being set up. - Page 12 What certain words and signs mean (Glossary) Recyclable material. Polystyrene Cardboard Mixed paper Steel Wood 12/92...
-
Page 13: What This Device Is
What this device is What this device is Guidelines Not applicable for this device. Export This device is exclusively intended for use in the USA and Canada and may not be exported to other countries and operated there! The manufacturer assumes no liability whatsoever in the event of non-compliance. -
Page 14: Device Description
What this device is Device description 1. Entry area 2. Foot mat (silicone) and vibration plate (Vibra Shape) 3. Low pressure lamps 4. Operating panel 5. Loudspeaker 6. Fans (door cooling) 7. Door handles (outside / inside) 8. Body cooling air nozzles 9. -
Page 15: Function Description
What this device is Sound system and Vibra shape 1. AUX-connection 2. Subwoofer 3. Loudspeaker 4. Vibration plate Function description See page 42 for information on control and operation of the device and its features. Vibra Shape You may choose from four (4) different programs, each offering varying levels of targeted muscle stimulation, exercise and massage intensity. -
Page 16: Transport
What this device is Transport +60 °C +140 °F -15 °C < 3 °C > 15 °C + 5 °F < 37 °F > 59 °F L x W x H (max) 228 x 127 x 210 cm 90 x 50 x 69 in. max 400 kg max 882 lb JK-Products GmbH... -
Page 17: Setup Location
What this device is 3.7.2 Setup location WARNING! Sudden movements and malfunctions! Crushing hazard. – The device is not suitable for operation in mobile facili- ties (ships, buses, trains). Adaptation of the unit is re- quired in order to guarantee trouble-free operation when used in mobile facilities. - Page 18 What this device is NOTICE Salty air! Contaminated air! Device damage due to corrosion of the housing and electrical components. – Do not install the device near swimming pools. – Do not operate the device in locations with aggressive environmental conditions (e.g.
-
Page 19: Commissioning
What this device is 3.7.3 Commissioning DANGER! Damaged mains power cable! Danger to persons through electric shock or burns. – Only the manufacturer or specialist companies are permitted to replace the mains power cable. Initial commissioning will be undertaken by the manufacturer's own service personnel or by a (Level 3) JK Factory Certified Technician. -
Page 20: Signs And Stickers On The Device
What this device is Signs and stickers on the device Signs which warn of danger areas or give important information on compo- nents are attached to the device. Ensure that the instruction signs are always clearly recognizable and easily legible. Any missing instruction signs or stick- ers must be replaced. - Page 21 What this device is 3: Name plate (example) MODEL-NO:JK 158 / BA 32-0 VS 2018-01 CLASS 1 15803D500005180505 230 V AC 3 – phase / 60 Hz 100003443 6,1 KW 3x17A 1323625 6,1 KW 2x20A 230 V AC 2 – phase / 60 Hz 18517 / 0 4: Sticker EMERGENCY OFF (1018687-..) 18465 / 1...
- Page 22 What this device is 8: USA mains connection sticker (1510692-..) The sticker is located on the lid below the cover. 22/92...
- Page 23 What this device is 9: Sticker component control USA 1510516-.. The sticker is located on the lid below the cover. 09/2018 1019179-00A Operating instructions – 23/92...
-
Page 24: Technical Data
What this device is Technical data 3.9.1 Power rating, electrical specifications and noise level Model-No.: JK 158 / BA 32-0 VS Power consumption rating: 6100 W Rated frequency: 60 Hz Rated voltage: 230 V 3 phase 230 V 2 phase Rated overcurrent protection device 30 amp 3-pole 40 amp 2-pole... -
Page 25: Dimensions
What this device is 3.9.2 Dimensions 18513 / 0 BK = 83 21⁄32 in 2,125 mm BK1 = 17 21/64 in 440 mm BK2 = 17 21/64 in 440 mm TK = 84 41/64 in 2,150mm TK1 = 25 25/64 in 645 mm TK2 = <... -
Page 26: Lamp Configuration
What this device is 3.9.3 Lamp configuration CAUTION! CAUTION! USE ONLY the specfied Beauty Angel NON-UV lamps! The conformity declaration and the ETL Intertek test mark only apply for the specified lamps. The mark is voided if other lamps are used. Use of UV lamps in this device is a violation of 21 CFR 1040.20, FDA. -
Page 27: Spare Parts
What this device is 3.9.5 Spare parts Number Description Order-no. Acrylic panels (side panels) 1510487-.. Acrylic panels (doors) 1510485-.. Acrylic panels (door, inside) 1510486-.. Protective goggles 1007934-.. MP3 cable 1001855-.. Allen key 83828-.. Filter mats 1510494-.. Filter 51937-.. Foot mat (silicone) 1506532-.. -
Page 28: Why You Use It
Why you use it Why you use it Intended use Beauty device This device is intended to temporarily firm and tone the appearance of the muscles and body. The device may not be used by people with reduced physical, sensory or mental capabilities or who have insufficient experience and/or knowledge without supervision. -
Page 29: Who Cannot Use It
Who cannot use it Who cannot use it Prohibited usage 5.1.1 Beauty system The following people must not use the device: Multiple people may not use the device at the same time. People with body weight of more than 300 lbs (150 kg) may not use the ... -
Page 30: Vibra Shape (Vibration Plate)
Who cannot use it 5.1.2 Vibra Shape (vibration plate) WARNING! Risk of damage to health! Vibrations can lead to or intensify health problems. You should never use the vibration plate when you are affected by one of the following health restrictions: –... -
Page 31: What You Must Do To Avoid Serious Harm
What you must do to avoid serious harm What you must do to avoid serious harm General DANGER – HIGH VOLTAGE! You can be killed or injured by an electric shock! Assembly and electrical connection must comply with na- tional and local regulations. –... -
Page 32: What You Must Do To Avoid Other Harm
What you must do to avoid other harm What you must do to avoid other harm General WARNING! Infections can be transferred through skin contact. All items/equipment components, with which the user can come into contact during the application, must be cleaned and disinfected after every session: –... -
Page 33: Vibra Shape - Vibration Plate
What you must do to avoid other harm Vibra Shape - vibration plate WARNING! Risk of injury! The vibration function is not suitable for all users. – Please observe the contraindications! See page 35. Side effects The use of the vibration plate may lead to the following side effects: Itching in regions of the body being trained ... -
Page 34: Obligations Of The Studio Operator
What you must do to avoid other harm Obligations of the studio operator As the operator you are responsible for providing clear operating, clean- ing/disinfection and maintenance instructions. You are also responsible for ensuring the intended use and the proper operation of the device by means of training and instruction for the personnel and provision of all appropriate safe- ty devices (including eyewear). -
Page 35: Risks Of Using This Device
Risks of using this device Risks of using this device WARNING! Use carefully. May cause serious burns! – Do not use over sensitive skin areas or in the presence of poor circulation. – The unattended use of infrared heat by children or in- capacitated persons may be dangerous. - Page 36 Risks of using this device Vibra Shape (Vibration plate) WARNING! Risk of damage to health! The following people should not use the Vibra Shape pow- ered exercise feature: Pregnant women People with limited/reduced mental capacity People with epilepsy/prone to seizures ...
-
Page 37: Benefits Of Using This Device
Benefits of using this device Benefits of using this device Vibra Shape The body immediately responds to the patented, pre-programmed movement of the vibration platform. Muscles automatically flex and relax as the Vibra Shape technology stimulates muscle activity, increases circulation and speeds the body's metabolic rate. -
Page 38: How To Decide To Use This Device
How to decide to use this device How to decide to use this device This device is intended only for commercial use and not for private use. Some people are not permitted to use the device, see chapter The device may not be used by people with reduced physical, sensory or mental capabilities or who have insufficient experience and/or knowledge without supervision. -
Page 39: What To Do Before The Treatment
What to do before the treatment What to do before the treatment Please check for any conditions that may prohibit the use of this device – see chapters Before the Beauty Angel lamps turn on, you have a few minutes to prepare yourself. -
Page 40: How To Use This Device
How to use this device How to use this device 12.1 How to set this device up After commissioning and cleaning/disinfection, the device is ready for operation. See chapter 12.5 12.2 How to make sure the device works Before using the device, check for damage to acrylic panels. 12.3 How to use it to treat your condition No other persons are permitted inside the cabin while the device is in... -
Page 41: How To Choose Correct Treatment Regimen
How to use this device 12.4 How to choose correct treatment regimen 12.4.1 Application times Applications per week Moderate schedule Intensive schedule [Number] [Number] 1. Week 2. Week 3. Week 4. Week 5. Week 6. Week 7. Week 8. Week 9. -
Page 42: How To Operate The Device
How to use this device 12.5 How to operate the device 12.5.1 Control Center 1. Display – Functions ... 2. Feature selection 3. OK button (not always visible) 12.5.2 User settings overview Not applicable for this device. 42/92... -
Page 43: Functions
How to use this device 12.6 Functions 1. START/STOP button 2. OK button (not always visible) 3. Audio system indicator 4. Volume pictogram 5. Voice Guide pictogram 6. Vibra Shape indicator 7. Body cooling indicator 8. Left navigation arrow button 9. -
Page 44: Navigation
How to use this device 12.6.1 Navigation Via the Control Center the most important settings can be made before start- ing the device. During the application session, functions may be activated or deactivated via the control panel inside the device. Navigation unit - Control Center The Control Center enables comfortable access to special functions. -
Page 45: Description
How to use this device 12.6.2 Description Pictogram selection / Navigation Description / Display Information key sequence START/STOP The application time continues to run if Switches the Beauty Angel lamps on / the Beauty Angel lamps are switched off off during the application. during the application. -
Page 46: Operating Display Of The Sensor
How to use this device Pictogram selection / Navigation Description / Display Information key sequence EMERGENCY OFF In standby, the EMERGENCY OFF but- ton does not have any function. If the EMERGENCY OFF button is pressed, the device shuts down except for the control element. -
Page 47: Selection Of The Application
How to use this device 12.8 Selection of the application Vibra Shape THE RIGHT TRAINING FOR EACH INDIVIDUAL Program Duration Description 10 Minutes Wellness (low intensity): Loosens and relaxes muscles, improves flexibility, and enhances well-being with gentle movements at low vibration frequency. -
Page 48: Connections
How to use this device 12.11 Connections WARNING! Danger of hearing damage! Using earphones or headphones at high volume can result in permanent hearing damage. – Do not set the volume too high. 12.11.1 MP3 player and smartphone CAUTION! The heat might damage your MP3 player or smartphone! –... -
Page 49: How To Use
How to use this device NOTE: The personal use of an MP3 player during the application is not a public broadcast in copyright terms, so that there is no obligation for registration or payment by the studio owner to the corresponding copyright owning company. Copy right laws apply to the owner of the MP3 player. -
Page 50: Application Tips
How to use this device 12.12.2 Application tips Behaviour before, during and after an application: No other persons are permitted in the vicinity of the cabin when using the device. Remove all jewellery (including piercings) prior to the application. ... -
Page 51: How To Stop
How to use this device – Place your feet on the footmarks (1). – Do not completely lock your knees (2). – Select Programme 1 as the first application in order to test the compatibility (3). – Press the START/STOP button (4/1) to stop the vibration plate if you think that it is causing discomfort or vertigo. -
Page 52: What To Do After The Treatment
How to use this device 12.13 What to do after the treatment 12.13.1 Cleaning and disinfection WARNING! Infections can be transferred through skin contact. All items/equipment components, with which the user can come into contact during the application, must be cleaned and disinfected after every session: –... -
Page 53: Safety Instructions For Cleaning/ Disinfection And Maintenance
How to use this device 12.14 Safety instructions for clean- ing/disinfection and maintenance DANGER – HIGH VOLTAGE! You can be killed or injured by an electric shock! During maintenance and service work there is a risk of touching live parts and receiving a fatal electric shock. –... - Page 54 How to use this device WARNING! Danger of burns from hot lamps and device parts! If the beauty device was operated before being switched off and opened, lamps and housing parts may be hot. – Before replacing lamps or other spare parts, wait until lamps and metal parts of the device have cooled down sufficiently.
-
Page 55: How To Clean/Disinfect
How to use this device 12.15 How to clean/disinfect WARNING! Infections can be transferred through skin contact. All items/equipment components, with which the user can come into contact during application, must be cleaned and disinfected after every session: – Protective goggles –... -
Page 56: Cleaning And Disinfection Of Surfaces
How to use this device 12.15.1 Cleaning and disinfection of surfaces Acrylic panel NOTICE Do not rub with a dry cloth – danger of scratching! – Other cleaning agents, especially concentrated disinfectants or solvents (e.g. Lysoform, ethyl alcohol or other liquids containing alcohol) must nev- er be used for cleaning. -
Page 57: Cleaning/Disinfection Plan
How to use this device 12.15.2 Cleaning/disinfection plan Component Interval Activity See page Entry area Clean and disinfect Foot mat (silicone) Clean and disinfect Control panel Clean and disinfect Handles Clean and disinfect Door handles (outside / inside) Clean and disinfect Protective goggles Clean and disinfect MP3 cable... -
Page 58: How To Maintain
How to use this device 12.16 How to maintain 12.16.1 Technical modifications The device has been constructed in accordance with current safety regula- tions. The illustrations and specifications on these instructions are subject to technical modifications which are required in order to improve the device. Unauthorized modifications and changes to the device and its control unit are prohibited. - Page 59 How to use this device Maintenance performed by the studio operator or a JK Factory Certified Technician Component Interval Activity See page 1 Low pressure lamps, rear door Replace 2 Low pressure lamps, side walls Replace 3 Low pressure lamps, front Replace doors 1 Acrylic panels, rear wall...
-
Page 60: Cleaning And Maintenance Work Preparation
How to use this device Maintenance performed by authorized, trained and qualified staff WARNING! Danger to persons from maintenance work that has not been carried out! If maintenance work is not carried out, it can lead to material damage or personal injuries! –... -
Page 61: Instructions For Replacing The Lamps
How to use this device 12.16.4 Instructions for replacing the lamps WARNING! Danger of burns from hot lamps and device parts! If the beauty device was operated before being switched off and opened, lamps and housing parts may be hot. –... - Page 62 How to use this device Low pressure lamps WARNING! Danger of burns from hot lamps and device parts! If the beauty device was operated before being switched off and opened, lamps and housing parts may be hot. – Before replacing lamps or other spare parts, wait until lamps and metal parts of the device have cooled down sufficiently.
-
Page 63: Cleaning And Disinfection Of The Sensor
How to use this device Makrolon tubes Not applicable for this device. Starter Not applicable for this device. High pressure lamps and filter panels Not applicable for this device. 12.16.5 Cleaning and disinfection of the sensor Not applicable for this device. 12.16.6 Cleaning or replacing lamps in the doors NOTICE... - Page 64 How to use this device – Use suction cup to open the rear wall. – Unscrew the screws of the strip. – Fold down the strip. 64/92...
- Page 65 How to use this device – Remove the acrylic glass panel and carefully lay it aside. Changing the lamps: see page 61. – Remove the magnetic cover. – Pull the lamps out downwards in order to remove them. 09/2018 1019179-00A Operating instructions –...
- Page 66 How to use this device The assembly is the same process in reverse order. During assembling, observe: – Insert the panel carefully into the rear guide. – Close and screw the strip tight. – Close the rear wall against slight resistance. –...
- Page 67 How to use this device – Fold the strip away. – Remove the acrylic glass panel and carefully lay it aside. Changing the lamps: see page 61. – Remove the lamp cover. – Pull the lamps out downwards in order to remove them. 09/2018 1019179-00A Operating instructions –...
-
Page 68: Cleaning Or Replacing Lamps On The Side Walls
How to use this device The assembly is the same process in reverse order. During assembling, observe: – Insert the panel carefully into the rear guide. 12.16.7 Cleaning or replacing lamps on the side walls NOTICE Acrylic panels unusable due to soiling! Soiling on the panels is burned in by the hot lamps and results in the long term in unserviceable panels. - Page 69 How to use this device The following work steps apply for both side walls. – Unscrew the screws of the strip. – Fold the strip away. – Remove the acrylic glass panel and carefully lay it aside. Changing the lamps: see page 61. 09/2018 1019179-00A Operating instructions –...
- Page 70 How to use this device – Remove the lamp cover. – Pull the lamps out downwards in order to remove them. 70/92...
-
Page 71: Cleaning Or Replacing Lamps And Filter Panels In The Canopy
How to use this device The assembly is the same process in reverse order. During assembling, observe: – Insert the panel carefully into the rear guide. 12.16.8 Cleaning or replacing lamps and filter pan- els in the canopy Not applicable for this device. 12.16.9 Cleaning or replacing the lamps and filter panels in the shoulder tanner... - Page 72 How to use this device – Remove the filters. – Clean the filters wet or dry. Dry cleaning: Vacuum cleaner (depending on the degree of soiling) Wet cleaning: Use water and detergent or put in a dish-washer NOTICE The device may be damaged by moisture! The cleaned filters must be dry before they are replaced.
-
Page 73: Cleaning The Filter Mats
How to use this device 12.16.14 Cleaning the filter mats – Remove the filter mats on the rear side of the doors. – Dry or moist clean the filter mats or replace with new ones. Dry cleaning: Vacuum cleaner (depending on the degree of soiling) Moist cleaning: Water and detergent –... -
Page 74: Cleaning The Filter Mats In Shoulder Tanner
How to use this device 12.16.15 Cleaning the filter mats in shoulder tanner Not applicable for this device. 12.16.16 Air conditioning: Empty the condensation tank and clean the filter Not applicable for this device. 12.16.17 AQUA / AROMA SYSTEM maintenance Not applicable for this device. -
Page 75: How To Store The Device
How to use this device 12.17 How to store the device 12.17.1 Decommissioning The device must be disconnected from the power supply in order to tempo- rarily or permanently decommission it. You must abide by the legal disposal requirements when permanently de- commissioning the device. -
Page 76: What To Do When Things Go Wrong
What to do when things go wrong What to do when things go wrong – Seek medical advice if in doubt! 13.1 Troubleshooting Software and device malfunctions are indicated by error codes, e.g. E005. These error codes are output to the display to simplify troubleshooting: If a fault occurs, the error code flashes on the display. -
Page 77: Where You Can Find Out More
Where you can find out more Where you can find out more If you have any questions, please contact Customer Service (see page 2). 09/2018 1019179-00A Operating instructions – 77/92... -
Page 78: How We Studied This Device
How we studied this device How we studied this device The system is built to the state of the art and the applicable safety regulations. We reserve the right to make technical changes which are necessary to im- prove the system or a system component even if they deviate from pictures and information in these instructions. -
Page 79: Appendix
Appendix Appendix 16.1 Model-No.: JK 158 / BA 32-0 VS: EMC information 16.1.1 Table 201: Guidelines and manufacturer's declaration – Electromagnetic emissions The beauty system has been designed for use in the electromagnetic envi- ronment specified below. The device operator must ensure that it is used in such an environment. -
Page 80: Table 202: Guidelines And Manufacturer's Declaration Electromagnetic Interference
Appendix 16.1.2 Table 202: Guidelines and manufacturer's declaration – Electromagnetic interference The beauty system has been designed for use in the electromagnetic envi- ronment specified below. The device operator must ensure that it is used in such an environment. Interference IEC 60601 - Defined Electromagnetic... -
Page 81: Table 204: Guidelines And Manufacturer's Declaration Electromagnetic Interference
Appendix 16.1.3 Table 204: Guidelines and manufacturer's declaration – Electromagnetic interference The beauty system has been designed for use in the electromagnetic envi- ronment specified below. The device operator must ensure that it is used in such an environment. Interference IEC 60601 - Defined Electromagnetic environment –... -
Page 82: Model-No.: Jk 158 / Ba 32-0 Vs
Appendix 16.1.4 Table 206: Recommended safe distances between portable and mobile HF communi- cations equipment and Model-No.: JK 158 / BA 32-0 VS Model-No.: JK 158 / BA 32-0 VS has been designed for use in an electro- magnetic environment in which the radiated HF interference is controlled. The operator of the device can help to reduce electromagnetic interference by maintaining a safe distance between the portable and mobile HF communica- tion devices (transmitters) and the device itself as recommended below with... -
Page 83: Jk-Products, Inc. - Limited Warranty
JK-Products, Inc. – Limited Warranty JK-Products, Inc. – Limited Warranty JK-Products, Inc. warrants its products to be free from defects in materials and workmanship under intended normal use as described in the unit's Oper- ation and Instruction Manual, for a period of one (1) year from date of sale. This Limited Warranty applies only to the original purchaser of the equipment through JK-Products, Inc. -
Page 84: Limited Acrylic Warranty
JK-Products, Inc. – Limited Warranty 17.1 Limited Acrylic Warranty JK Products, Inc. warrants its acrylic sheets to be free from defects in material and workmanship, under intended normal use, for a period of one (1) year from date of sale of the appliance or 1,200 hours of operation whichever comes first. -
Page 85: Warranty Claims
JK-Products, Inc. – Limited Warranty 17.2 Warranty Claims 17.2.1 Policy & Procedures 1. When to file a Warranty Claim: In the event that your beauty system is not functioning properly under intend- ed normal use as described in the unit's Operation and Instruction Manual, you may then have established cause to file a Warranty Claim. -
Page 86: Labor Warranty Claim/Credit Procedures
JK-Products, Inc. – Limited Warranty Any other use shall be considered improper. The manufacturer cannot be held liable for damage or injuries resulting from misuse. The operator bears the sole risk for this. The proper use also includes compliance with the manufacturer`s instructions, operating and maintenance conditions. - Page 87 JK-Products, Inc. – Limited Warranty NOTE: Any misuse, abuse, modification, alteration, improper maintenance, improper installation, etc. of this product or its intended use will subject said party to direct responsibility and liabilities for any and all consequences resulting from such action. Furthermore, such actions will void all warranties and may relieve Global Service USA of any liabilities relating to said product.
- Page 88 JK-Products, Inc. – Limited Warranty 88/92...
- Page 89 JK-Products, Inc. – Limited Warranty 09/2018 1019179-00A Operating instructions – 89/92...
-
Page 90: Index
Index Index Air routing ......... 16 Filter mats, cleaning ....73 Application ........ 47 Filter panels ......63 Application times ...... 41 maintenance intervals ..58 Application tips ......50 Filter, cleaning ......71 Foreseeable misuse ....33 Functions ........43 Base plate load ........ - Page 91 Index Obligations of the studio operator ....34 Operating altitude ...... 17 Order numbers ....26, 27 Packaging ......... 75 Plastic surfaces (care) ....56 Power rating ......24 Prohibited usage ....... 29 Protective goggles ....50 Recycling ........75 Risk of injury ......
- Page 92 Index 92/92...