ergoline SUNRISE 480 Turbo Power Operating Instructions Manual page 59

06/2018 1019683-00
– Turn the lamp 90°.
The lettering must be oriented towards the outside (i.e. towards the
tanning room or towards the user).
Makrolon tubes
Not applicable for this device.
Starter
Replace faulty starters immediately.

You can recognize a faulty starter by the blackened ends of the lamps or
when the lamps can no longer be started.
Operating a lamp with a faulty starter significantly shortens its service life. The
lamp loses power and may begin to flicker under certain circumstances.
The starters are located in either one of the two lamp sockets or are visible
when the lamps are removed.
– Turn 90° and carefully remove from the socket.
How to use this device
Operating instructions – 59/84