Cleaning And Disinfection Of The Sensor; Cleaning Or Replacing Uv Lamps In The Door - ergoline SUNRISE 480 Turbo Power Operating Instructions Manual

How to use this device
60/84
High pressure lamps and filter panels
Not applicable for this device.
12.16.5

Cleaning and disinfection of the sensor

Not applicable for this device.
12.16.6

Cleaning or replacing UV lamps in the door

Acrylic panels unusable due to soiling!
Soiling on the panels is burned in by the hot lamps and results in the long term
in unserviceable panels.
– Remove fingerprints and other soiling carefully.
Door handle:
– Remove the screws and remove door handle.
Acrylic panel:
– Remove the screws.
– Remove the acrylic panel and carefully lay it aside.
Upper lamp cover:
– Loosen screws 3-4 mm.
– Take off the lamp cover.
Replacing lamps: see page 57.
Replacing starters: see page 59.
NOTICE