How to use this device
Function
Pictogram selection /
Button sequence
1. UV lamps
2. Body cooling
3. AQUA SYSTEM
4. AROMA
7. Volume
42/84
12.6.1
Navigation
The unit is operated with the navigation ring.
Switch on lamps:
Tip the button once.
Switch off lamps/interrupt application:
Hold the button.
Select device function (go to indicator), e.g. MUSIC
Select sub-function (if available)
Change setting
Pictograms of available functions are illuminated in default mode after starting
up the tanning device. After selecting a function, the corresponding pictogram
and the navigation ring flash for a short time. During this time settings may be
changed.
Operation – Demonstration mode
–
Press
until
The audio functions and Vibra Shape (additional feature) can be tested in
demonstration mode. You have 30 seconds in which to select the function.
12.6.2
Description
Description / Display
START/STOP
Switches the UV lamps on / off
during the tanning session
Regulate body cooling, levels 1-9
Switching AQUA SYSTEM on
Switching AQUA SYSTEM off
Switching AROMA on
Switching AROMA off
Adjusting the volume
Tone off: Press button
displayed
Information
The tanning time continues to run if
the UV lamps are switched off during
tanning session.
until