How to use this device
62/84
Right acrylic panel:
–
Remove the screws.
–
The panel must be taken out past the cockpit control. Ensure that you do
not scratch the panel.
–
Carefully pull the panel past the back of the cockpit control and remove to
the left.
Upper lamp cover:
–
Loosen screws 2/16 in (3-4 mm).
–
Take off the lamp cover.
Replacing lamps: see page 58.
Replacing starters: see page 59.
The assembly is the same process in reverse order.
When assembling the device please note:
–
Always replace the right acrylic panel first.
12.16.8
Cleaning or replacing UV lamps and filter
panels in the canopy
Not applicable for this device.