ergoline SUNRISE 480 Turbo Power Operating Instructions Manual page 50

How to use this device
50/84
Injuries and damage due to improper maintenance!
If the maintenance intervals for the UV lamps are exceeded
or incompatible UV lamps are installed, the share of harmful
UVB radiation may increase. Sunburn and other skin dam-
age may result.
Improper maintenance can cause the device to be damaged
or to become unusable.
– Always comply with the specified maintenance inter-
vals, see chapter 12.16.2 Maintenance plan.
– Follow the cleaning/disinfection instructions.
Danger of burns from hot lamps and device parts!
If the tanning device was operated before being switched off
and opened, lamps and housing parts may be hot.
– Before replacing lamps or other spare parts, wait until
lamps and metal parts of the device have cooled down
sufficiently.
Danger of squeezing!
When opening and closing the panels and acrylics, you can
squeeze your fingers.
Maintenance and care play a major role in deciding the devices performance
and appearance over its useful life. Diligent compliance at the specified inter-
vals is absolutely necessary to ensure the proper operation of your device.
The current operating hours of the parts requiring maintenance can be dis-
played in the Presetting mode – see separate instructions 'Presettings'
#1011803-.. in the Technical Documentation folder.
Please note that the device must be inspected regularly by a JK authorized
representative every 12 months (from date of installation) to maintain its
proper condition!
Acrylic panel
The acrylic panels for the tanning devices are produced of acrylic glass de-
veloped especially for this application. The acrylics used feature a particularly
high UV permeability and resistance, as well as an easy-care, hygienic sur-
face that is gentle on the skin.
The acrylic panels are formed to device-specific shapes in a technically com-
plex production process. Despite state-of-the-art production know-how, the
presence of minor spots, air bubbles or streaks in the acrylic panels is una-
voidable. In addition, hairline cracks can occur on the acrylic panel during
operation.
These occurrences are material-related and are unavoidable in processing.
However, they have no significant effect on use and are therefore not accept-
ed as defects.
WARNING!