Appendix; Model-No.: Jk 103 / 40-3 Ac: Emc Information - ergoline JK 103/40-3 AC Operating Instructions Manual

Appendix

16 Appendix
Emission measurements
HF emissions as per CISPR 11 Group 1
HF emissions as per CISPR 11 Class B
80/92
16.1 Model-No.:
JK 103 / 40-3 AC: EMC information
16.1.1 Table 201: Guidelines and manufacturer's
declaration – Electromagnetic emissions
The tanning system has been designed for use in the electromagnetic envi-
ronment specified below. The device operator must ensure that it is used in
such an environment.
Conformity Electromagnetic environment – Guidelines
Model-No.: JK 103 / 40-3 AC uses HF power mostly for internal func-
tions. Therefore the HF emissions are very low and it is highly unlikely
that it will cause any interference to adjacent electronic equipment.
Model-No.: JK 103 / 40-3 AC has been designed for use in all devic-
es, including those in residential areas, and it has been determined
that it can be used for residential purposes as soon as it is connected
up to a public mains supply that also supplies buildings.