Cleaning Or Replacing The Lamps In The Side Section; Cleaning Or Replacing Lamps And Filter Panels In The Canopy; Cleaning Or Replacing The Lamps And Filter Panels In The Shoulder Tanner - ergoline JK 103/40-3 Operating Instructions Manual

How to use this device
66/88
12.16.7 Cleaning or replacing the lamps in the side
section
Not applicable for this device.
12.16.8 Cleaning or replacing lamps and filter pan-
els in the canopy
– Remove the canopy panel: see page59.
– Remove the lamp cover.
Replacing lamps:
Low pressure lamps: see page 62.
High pressure lamps and filter panels: see page 63.
Replace the starter: see page 63.
The assembly is the same process in reverse order.
When assembling the device please note:
– When replacing the lamp covers ensure that the clips are in contact with
the magnets.
– Use scratch protection.
– Carefully lay the canopy panel in the guide.
12.16.9 Cleaning or replacing the lamps and filter
panels in the shoulder tanner
Not applicable for this device.