Table of Contents
Advertisement
4.4.3 Cleaning/replacing the UV low pressure
lamps in the canopy
Removal
Danger of burns!
Make sure that the UV low pressure lamps have cooled
down.
•=
Disconnect sunbed and secure against
accidentally being switched on again (refer to
section 4.3).
Risk of injury from falling acrylic panel!
Hold the acrylic panel securely when opening it.
01511 / 0
•=
Hold the acrylic panel (1) and unscrew the
screws (2) at the head and foot ends with an
Allen key.
•=
Carefully fold down acrylic panel (1) and place on
the base.
•=
Remove the UV low pressure lamps (3) and (4)
and change, cleaning with a damp cloth if
necessary.
4
3
1
2
04014 / 0
Installation
•=
•=
Maintenance
Insert the UV low pressure lamps with the
lettering towards the foot end and rotate by 90
degrees (1/4 turn) until they catch. The lettering
is on the visible side of the UV low pressure
lamps. Do not align the lamps by the lettering.
For further assembly proceed in reverse order.
1
2
3
4
5
6
7
8
9
10
11
29
Advertisement
Table of Contents
