Function Description; Transport - ergoline JK 103/40-3 Operating Instructions Manual

What this device is
14/88
NOTE:

Always consult a licensed heating, ventilation, and air
conditioning (HVAC) Technician when considering the
option to exhaust the warm air from your device. They
can help you decide if an exhaust is best for you specific
location.

The exhaust is a comfort option and does not increase or
decrease the safety and effectiveness of the device. The
exhaust duct is not required to keep the device in a cer-
tain temperature range in order to operate safe and ef-
fectively.
3.6

Function description

The primary technical components of a tanning device are an artificial source
of UV radiation, a variety of filters and reflectors as well as a mechanical
structure with a defined active surface.
Different tanning results can be achieved in varying strength tanning devices.
This is due to the different strength UV lamps and the different UV-A and UV-
B proportions of the UV radiation. The UV-A proportion primarily generates a
superficial tan, which appears rapidly and is intensive but also fades more
rapidly, the UV-B radiation is primarily responsible for more long-term tanning
results. The disadvantage of the UV-B radiation is that the tan does not be-
come visible until one or two days after visiting the tanning salon. Therefore,
the appropriate tanning device is to be selected depending on the desired
tanning goal.
The tanning devices described here primarily emit UV-A radiation and are
equipped with additional UV-B lamps (low pressure UV lamps in the face
tanners).
3.7

Transport