Table of Contents
Advertisement
Chapter 9
440R-ENETR Network Interface Add-on Profile
62
The Select Module Type window appears
3. Find the 440R-ENETR. You can search, filter, or scroll to find it.
4. Click Create to add the module to the project.
Figure 44 - Select Module Type
The New Module window opens that shows the General information
(Figure
45).
5. Verify that the Series, Revision, Electronic Keying, and Connection are
as shown (or later).
6. Enter a name.
7. Enter a description (optional).
8. Select an IP address.
9. Click Change to add GSR relays to the project.
Figure 45 - New Module - General Tab
Rockwell Automation Publication 440R-UM015C-EN-P - April 2018
(Figure
6
7
5
44).
3
4
8
9
Advertisement
Table of Contents
