Table of Contents
Advertisement
11. Go on-line
12. Download the configuration to the controller.
11
Manual Method
Figure 46
shows the module definition and the steps necessary to add relays
that the 440R-ENETR interface monitors.
1. Right-click Relay Bus.
2. Click Add Device.
3. Click one of the devices in the list that appears. You can select multiple
devices, but the DG safety relays must be together and closest to the
440R-ENETR interface. For this example, click the DG safety relay.
Figure 46 - Module Definition - Add a DG Safety Relay
2
1
Rockwell Automation Publication 440R-UM015C-EN-P - April 2018
440R-ENETR Network Interface Add-on Profile
12
3
Chapter 9
65
Advertisement
Table of Contents
