Table of Contents
Advertisement
Chapter 3
Installation
Tap Installation
34
The tap can be installed directly with two M5 screws. In
38.5 mm (1.5 in.) wide tap fits neatly on a standard 40 mm (1.6 in.) aluminum
extrusion construction profile.
Figure 15 - Mounting Directly on 40 mm (1.6 in.) Profile
Figure 16
shows an optional quick mounting bracket, catalog number
(1)
440S-GLTAPBRKx
tap snaps into place and can be easily removed to install patchcords and
cordsets.
Figure 16 - Quick-release Mounting Bracket
Recessed Mounting Holes (x6)
Figure 17
shows the dimensions of the quick-release mounting bracket.
Figure 17 - Mounting Bracket Dimensions
38.5
(1.51)
20
(0.79)
76.6 (3.01)
25
(0.98)
(1) Replace the x with 1 to order one bracket and replace with a 5 for a package of five brackets.
Rockwell Automation Publication 440R-UM015C-EN-P - April 2018
INPUT
M5 Screws
, is available to facilitate installation and removal. The
Quick Release Clip
6 x 5.4 (0.21) Ø for M5 screws
(11 (0.43) Ø max. screw head)
22
(0.87)
11
(0.43)
19.6
(0.77)
Figure
15, the
40 mm
(1.6 in.)
Advertisement
Table of Contents
