Table of Contents
Advertisement
Chapter 9
440R-ENETR Network Interface Add-on Profile
68
When the nodes are established, click the OK button and confirm the
module change by clicking Yes as shown in
Figure 52 - Confirm Module Change
You return to the General tab. Use the Change button to add up to six
relays.
Figure 53
safety relays are listed first.
Figure 53 - Example with Three Relays
Rockwell Automation Publication 440R-UM015C-EN-P - April 2018
shows an example with three relays. Notice that the DG
Figure
52.
Advertisement
Table of Contents
