Simplex 4100ESi Installation Manual page 7

Cautions, warnings, and regulatory
information
Non-Disclosure Agreement
Johnson Controls International (THE COMPANY) and the User of this/these document(s) desire to share
proprietary technical information concerning electronic systems.
For this reason the company is disclosing to the User information in the form of this/these document(s). In as
much as the company considers this information to be proprietary and desires that it be maintained in
confidence, it is hereby agreed by the User that such information shall be maintained in confidence by the User
for a period of TEN YEARS after the issue date and only be used for the purpose for which it was supplied.
During this period, the User shall not divulge such information to any third party without the prior written
consent of the company and shall take reasonable efforts to prevent any unauthorised disclosure by its
employees. However, the User shall not be required to keep such information in confidence if it was in their
possession prior to its receipt from the company; if it is or becomes public knowledge without the fault of the
User; or the information becomes available on an unrestricted basis from a third party having a legal right to
disclose such information.
The User's receipt and retention of this information constitutes acceptance of these terms.
This information is copyright and shall not be reproduced in any form whatsoever.
End User Liability Disclaimer
The 4100ESi Fire Alarm System provides a configuration programming facility, which may be accessed via a
programming computer using a "dongle". Because this programming facility allows the user to define in detail
the operation of the 4100ESi System being customised, changes may be made by the user that prevent this
installation from meeting statutory requirements.
The Company, therefore cannot accept any responsibility as to the suitability of the functions generated by the
user using this programming facility.
7