Simplex 4100ESi Installation Manual page 11

Other references
More information about the setup, operation, and maintenance of the 4100ESi Fire Alarm panel can be found
in the following documents:
⋅
LT0619 4100ESi Programming Manual - for configuring the system software and site specific data files.
⋅
LT0617 4100ESi Operator Manual - for basic operation of the panel using the touchscreen interface.
⋅
LT0432 4100ESi Australian Wiring Diagrams - for connection of field equipment to the panel and
interconnection of panels for networking.
⋅
LT0620 4100ESi Service and Upgrade Manual - for service and maintenance operations, and details on
how to upgrade earlier versions of the 4100 series of panels to 4100ESi.
Individual system components such as slave cards, field devices, and detectors are supplied with installation
information specific to the component. Some of that information is repeated in this installation manual.
⋅
LT0614 4100ESi Brigade Interface Bracket Installation Instructions - describes fitting the ME0512
Centaur and ME0513 WA/ASE brackets.
⋅
LT0615 Simplex Media Card Installation Instructions - describes fitting and wiring the NIC media cards.
⋅
LT0622 Dual Loop Card Bracket Installation Instructions - describes fitting the ME0516 Dual Loop Card
bracket.
⋅
LT0624 NT Brigade Door Installation Instructions - describes fitting and wiring the FP1093 NT 6U Door.
⋅
LT0627 4100ESi 8U and 15U Expansion Cabinet Installation Instructions – describes installing the 8U
and 15U expansion cabinets.
⋅
LT0629 4100ESi Remote Fire Brigade Panel Installation Instructions – describes installing and wiring the
FP1048 Remote Fire Brigade Panel.
⋅
LT0632 4100ESi 7U Display Door Installation Instructions – describes fitting the 7U display door in
various cabinets.
⋅
LT0633 4100ESi Fan Control Setback Bracket Installation Instructions –describes fitting the fan control
module in large cabinets.
⋅
LT0638 4100ESi MX Loop Card Installation Instructions – describes installation, configuration, and wiring
of the MX Loop card.
11