Introduction; General Information; Intended Use - Thermo Scientific AquaPro User Manual

1. INTRODUCTION

1.1

General Information

Thank you for purchasing the Thermo Scientific AquaPro Analyzer.
The product is designed for continuous use in industrial process applications and complies with safety
regulations currently in force. Improper use could lead to hazards for the user or a third-party, and/or adverse
effects to the plant or other equipment.
Thermo Fisher Scientific does not accept any liability for damage that may arise if information in this
manual is not followed. Therefore, the operating instructions and specifications must be read and
understood by all persons involved in installation and operation of this equipment.
This manual identifies safety instructions and additional information by means of the following symbols:
It is recommended that this manual be made accessible to everyone who may need it as a reference.
Please contact Thermo Fisher Scientific or an authorized representative with any questions.
1.2

Intended Use

The Thermo Scientific Analyzer is designed to monitor and control up to four in-line measurement points with all
DataStick, AnalogPlus and RDO process.
Any other use, or use not mentioned here, that is incompatible with the technical specifications is deemed
inappropriate. The operator is solely responsible for any damage arising from such use.
Other prerequisites for appropriate use include:
 Observing the instructions, notes and requirements set out in this or updated instruction manuals.
 Observing all local safety regulations.
 Observing all warnings and cautions in the documentation regarding all products used in this
measurement system, including the sensor, mounting hardware, AquaPro electronics and cabling.
 Observing the prescribed environmental and operational conditions.
 Observing chemical compatibility with all wetted materials.
Thermo Scientific AquaPro Analyzer User Guide
This symbol draws attention to safety instructions and warnings of potential danger,
which if neglected, could result in injury to persons and/or damage to property.
This symbol identifies additional information and instructions, which if neglected, could
lead to inefficient operation and possible loss of production.
5