Setting The Unicast Ip Address - Cisco D9865 Installation And Configuration Manual

Chapter 4 Setup and Monitoring via On-Screen Display

Setting the Unicast IP Address

Viewing the Unicast IP
Unicast transmission is used to send messages to a specific address. You can specify up to six single
network destinations. The Gateway address is necessary if the network address is not on a local network.
Proceed as follows to view the Unicast IP addresses:
From the Network Setup screen, select Unicast IP Setup and click OK.
The Unicast IP Setup screen lists all the IP addresses and its Gateway addresses that are participating in
a Network environment.
Adding a Unicast IP Address
Proceed as follows to add a Unicast IP Address:
From the Unicast IP Setup screen, press the green button (Add) to add a new address.
Step 1
Make the necessary changes. The following table describes each of the options:
Step 2
OL-31085-01
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
Setup Menu
4-45