Viewing Service Information - Cisco D9865 Installation And Configuration Manual

Chapter 4 Setup and Monitoring via On-Screen Display
The following table displays the hardware information:
Hardware Information
Model
Board
Revision
Tracking ID
PWB Serial Number
MAC Address 1, MAC Address
2 (D9865D only)
IP Address 1 and IP Address 2
(D9865D only)
Viewing Installed Options
Proceed as follows to view the installed hardware options:
From the Hardware Information screen, press the yellow button (Inst Opt).
The Installed Options screen displays the hardware options installed in the current D9865 satellite
receiver.

Viewing Service Information

Proceed as follows to view the service information.
From the Info screen, select Service Information and press OK.
OL-31085-01
Description
Indicates the model number of the receiver.
Indicates the board type.
Indicates the board revision number.
This is the unique Tracking ID number that identifies the product
version.
Displays the serial number for the PWB (printed wiring board).
Indicates the MAC addresses assigned to the Ethernet interface at
the time of manufacture.
Indicates the IP address assigned to the receiver in a network for
Port 1 and Port 2.
Note Only Port 1 is available for this release.
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
Setup Menu
4-59