Selecting The Active Preset - Cisco D9865 Installation And Configuration Manual

Setup Menu
Selection
Preset Number
Preset Name
LNB Configuration
Modulation Type
Downlink (Freq)
Symbol Rate
NetId
Last Activated Preset
Signal Lock
Signal Level
Press the green button (Save) to save and apply the settings to the receiver.
Step 3

Selecting the Active Preset

To change the displayed preset to the Active preset or to select a different preset as the active preset:
From the Tuning/Preset screen, press the yellow button (Preset).
Step 1
Step 2 Enter the preset in the Preset field that you want to activate. Enter the number directly using the numeric
keypad on the remote control or use the
Alternatively, press the red button (keyboard) to enter the preset using an on-screen keyboard.
Select Activate (blue button) to choose the preset. This will activate the currently displayed preset as the
Step 3
active preset.
You will be prompted to accept the new preset and warned that service interruption will occur.
Select OK to proceed or EXIT to cancel the operation.
Step 4
Press MENU to go to the previous menu.
Step 5
Note
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
4-18
Options
1 to 64
Enter name
1 to 10
DVB-S
DVB-S2
Enter number
1.0 to 45.0
1.0 to 31.0
Enter number
It will take up to 30 seconds for signal acquisition to occur. It can take longer if the symbol rates
are low.
Chapter 4
Description
Enter or select the preset number.
Set the preset network name.
Enter or select the LNB configuration.
Select the modulation scheme.
For C-Band,
Downlink Freq = LO Freq - L-band Freq.
For Ku-Band,
Downlink Freq = LO Freq + L-band Freq.
Range for DVB-S in MS/s.
Range for DVB-S2 in MS/s.
Obtain the number from your service provider.
Indicates the number of the last activated preset.
Indicates signal synchronization status.
Indicates the relative strength of the received
signal, in the range from 0 to 100.

buttons to change the number one digit at a time.
Setup and Monitoring via On-Screen Display
OL-31085-01