Chapter 4 Setup And Monitoring Via On-Screen Display; Main Menu - Cisco D9865 Installation And Configuration Manual

Setup and Monitoring via On-Screen Display
This chapter describes how to set up and monitor the D9865 Satellite Receiver using the on-screen
display. This information is primarily applicable for standalone operation. This chapter presents the
following major topics:
•
•
•
•
•
•

Main Menu

This section contains the information you need to set up your Satellite Receiver using the on-screen
display menus. Before you begin using the receiver, you may need to change the current settings to suit
your operating requirements.
To display the Main Menu, press the MENU button on the remote control or receiver front panel.
If the D9865 Satellite Receiver is enabled to receive Electronic Program Guide (EPG) data, the following
Main Menu screen appears:
OL-31085-01
Main Menu, page 4-1
Channel List without EPG, page 4-4
Introducing EPG, page 4-5
Setting Up Your Favorite Channels, page 4-10
Setting Up One Button Channel Change, page 4-12
Setup Menu, page 4-14
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
4
C H A P T E R
4-1