Setup Menu
Press the yellow button (Alarm) to configure the alarm settings. Press the blue button (Warning) to
Step 4
configure the warning settings.
To configure the Alarm settings
From the Alarms & Warnings screen, press the yellow button (Alarm) on the remote control.
Set the following alarm options:
Alarm Setting
Alarm Name
Alarm Enable
Send Trap (D9865D only)
To configure the Warning settings
From the Alarms & Warnings screen, press the blue button (Warning) on the remote control.
Set the following warning options:
Warning Setting
Warning Name
Warning Enable
Send Trap (D9865D only)
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
4-54
Chapter 4
Description
Displays a list of the alarm/fault messages. You can scroll through
the list using the
buttons.
When set to Yes, the alarm message will be reported. When set to
No, the fault will not be reported.
When set to Yes, the SNMP trap message will be sent to the trap
destination; otherwise the fault message will be ignored.
Description
Displays a list of the warning messages. You can scroll through the
list using the
buttons.
When set to Yes, the warning message will be reported. When set to
No, the fault won't be reported.
When set to Yes, the SNMP trap message will be sent to the trap
destination; otherwise the warning message will be ignored.
Setup and Monitoring via On-Screen Display
OL-31085-01