The On-Screen Buttons; About The Current Channel; Channel List Without Epg - Cisco D9865 Installation And Configuration Manual

Channel List without EPG

The On-Screen Buttons

The on-screen menus have the following common buttons:
Button
Save
Exit

About the Current Channel

When you navigate to menus from a video channel, the information displayed is associated with the
current (video) channel. If no changes have been made to the current setup, you are automatically
returned to the same video channel when you exit to video.
Channel List without EPG
If the receiver does not support EPG, you can access the Channel List from the Main Menu.
To select a channel from the channel list:
Step 1 From the Main Menu screen, select Channel List and press OK. The Channel List displays all the
available subscriber channels.
Step 2 Select a channel from the channel list and press OK. This will tune to the selected channel (top right)
and the channel information is displayed in the bottom right of the channel list.
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
4-4
Description
Saves and applies the settings to the receiver.
Exits edit mode and menu. A message prompts you to save or discard
changes before you exit the menu.
Chapter 4 Setup and Monitoring via On-Screen Display
OL-31085-01