Cisco D9865 Installation And Configuration Manual page 57

Chapter 4 Setup and Monitoring via On-Screen Display
Selection
Satellite Number
Absolute Position
Installer Action
OL-31085-01
Options
1 to 255
0.0 to 75.0
Continuous West
Movement
Continuous East
Movement
Stop Move
Goto Absolute Position
West
Goto Absolute Position
East
Goto Reference
Goto Satellite
Store Satellite
Clear Limits
Store East Limits
Store West Limits
Calculate Position
None
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
Description
Number identifying the saved satellite location as
defined by the dish motor manufacturer.
Position of the satellite in degrees.
Moves the dish west until it reaches its limit.
Ensure that the dish can move to its limit without
any obstructions.
Moves the dish east until it reaches its limit.
Ensure that the dish can move to its limit without
any obstructions.
Stops movement of the dish.
Moves the dish to the Absolute west position set
above.
Moves the dish to the Absolute east position set
above.
Moves the dish to a reference defined by the dish
motor manufacturer.
Moves the dish to the selected pre-stored satellite
position. Satellite positions are stored in the dish
motor, if supported, not in the receiver.
Stores the current dish position as a Satellite
Number, if supported by the dish motor.
Clears the dish east and west limits stored in the
dish motor.
Stores the current position as the east limit in the
dish motor.
Stores the current position as the west limit in the
dish motor.
Updates the position of the dish according to the
current position. For more information, refer to the
dish manual provided by the dish manufacturer.
No action is performed.
Setup Menu
4-23