Configuring The Common Interface (Ci) Information - Cisco D9865 Installation And Configuration Manual

Configuring the Common Interface (CI) Information

Channel Information
Conditional Access System
Authorized
Scrambled
Encrypted
The PID Information area displays the PIDs associated with a selected channel.
Step 5

Configuring the Common Interface (CI) Information

The Common Interface (CI) slot is located behind the door on the front panel. They allow use of a CAM
(Conditional Access Module) Smartcard to decrypt purchased programming.
Note You must be authorized to view the programming available via the Smart Card from your service
provider.
CAMs must be purchased from Cisco. For a list of the supported CAMs, see
page
Proceed as follows to configure the CI settings:
Step 1 From the user interface of the D9865, choose Input > Conditional Access. The CI Setup page is
displayed.
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
5-22
3-4.
Description
Indicates the type of CA used for the received signal.
Indicates whether the receiver is authorized to receive the signal.
Indicates whether the received signal is scrambled.
Indicates whether the received signal is encrypted.
Chapter 5 Setup and Monitoring via Web GUI
Common Interface Modules,
OL-31085-01