Power supply
6.1
SIDOOR NT40
6.1.1
Description
Intended use
The device may only be used in combination with the control devices specified in the product
combination.
Note
Electromagnetic compatibility
The SIDOOR NT40 power supply meets the requirements of the EMC standard
EN 61000-6-4.
The SIDOOR NT40 power supply can cause interference if used in a residential
environment. The commissioning engineer is responsible for interference suppression.
Design
①
②
③
Figure 6-1
98
Power plug X1 (Schuko plug)
230 V AC (± 15 %) 50 / 60 Hz
Output X2 (connection to control device)
36 V DC (± 3 %) 2.5 A (15 A for < 2 s)
LED L1
SIDOOR NT40
Door control units SIDOOR AT40 and ATD400V for elevators
System Manual, 06/2018, A5E42192709-AC
6