Sidoor Functions - Siemens SIDOOR AT40 System Manual

SIDOOR functions

Overview
This section describes all the functions of the SIDOOR control devices.
The functions are divided into:
● Basic functions: Functions that you always require to use a SIDOOR door control system.
● System functions: Functions that enable you to better monitoring and diagnose the
system.
● Extended functions: Functions that you can use to implement application-specific
requirements.
Functions
Table 3- 1 Available SIDOOR functions
Functions
Basic functions
Learn run (Page 20)
DCPS (Door Closed Position Sensor) (Page 24)
CLOSE DOOR (command given via digital inputs) (Page 26)
OPEN DOOR (command given via digital inputs) (Page 26)
System functions
Restart after power failure (Page 27)
Overload protection (Page 28)
Vandalism protection/continuous door monitoring (Page 28)
Oscillation protection (Page 28)
Automatic energy limiting (Page 29)
Emergency release (Page 32)
External closing force (Page 34)
Extended functions
Obstruction detection (Page 34)
Maintenance data (Page 35)
Emergency power mode (Page 44)
Spring mechanism in closed position (Page 43)
Light barrier
Light barrier (Page 45)
Light barrier and DCPS cannot be implemented at the same time.
1)
Emergency power mode and light barriers with feedback contact cannot be implemented simultaneously.
2)
Door control units SIDOOR AT40 and ATD400V for elevators
System Manual, 06/2018, A5E42192709-AC
3
SIDOOR
AT40 ATD400V
✓ ✓
✓ ✓
1) 1)
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
2) 2)
✓ ✓
✓ ✓
1) 1)
19