Siemens SIDOOR AT40 System Manual page 100

Function
The SIDOOR NT40 is a 230 V AC (± 15 %) 50 / 60 Hz power supply unit for supplying
SIDOOR control devices for door weights up to 600 kg.
On the output side, the switch mode power supply supplies a 36 V DC (± 3 %) SELV at a
rated output power < 100 W. The device can briefly (< 2 s) deliver a 15 A current to enable
fast acceleration (corresponds to a brief power output of 540 W).
Short-circuit protection
Output X2 is short-circuit proof.
LED display
LED L1 indicates the presence of the output voltage.
Note
If the LED does not light up despite being correctly connected to the X1 supply line and if
there is no measurable output voltage, this indicates a short circuit on the output side or a
defective module!
The device can be operated by the control device without load to establish whether the
module is defective. If the LED at the output does not light up in this mode of operation, and
there is no measurable voltage at the output, this indicates that the device is defective!
Door control units SIDOOR AT40 and ATD400V for elevators
System Manual, 06/2018, A5E42192709-AC
Power supply
6.1 SIDOOR NT40
99