Outlet Box Wiring And Settings - Sanyo Denki SANUPS E11A102U-J Instruction Manual

Optional Equipment
§ 1 8 . 3 . 1 O u
§ 1 8 . 3 . 1 O u
Equipment you will need
Outlet box
One outlet box is required for each UPS.
！
CAUTION
① Check that MAIN MCCB
not connected to the utility power outlet.
② Using the outlet box connection cable, connect the outlet box to the "AUX.OUTPUT" terminals 1 to 4 of
the UPS.
AUX.OUTPUT terminal connection procedure
1. Depress the lever with a flat-blade
screwdriver or similar tool, and then insert
the wire into the terminals 1 to 4.
2. Pull the inserted wire to make sure it does
not come out.
Terminals
1 to 4
③ Insert the input plug of the outlet box into one of the UPS outlets.
④ Connect the input power plug of the UPS to a utility power outlet, and set
panel to "ON".
⑤ Set item §3.20 "Enabling and Disabling Output line Control" in the
⑥ Set the Output line Control items §3.21 to §3.27 in the
⑦ Set MAIN MCCB
to "ON" again to restart the UPS.
The setting of §3.20 "Enabling and Disabling Output line Control" is enabled when the UPS restarts.
User settings when using an outlet box
Output line control
Disabling Output line Control" is set to "Enabled". When using the outlet box be sure to set it to "Enabled". (The
factory default setting is "Disabled".)
59
t l e t B o x W i r i n g a n d S
t l e t B o x W i r i n g a n d S
Before wiring, set MAIN MCCB
input power plug from the utility power outlet, and make sure the UPS is completely
stopped. Failure to do so can result in electric shock.
on the back panel of the UPS is set to "OFF", and that the input power plug is
Depress lever with flat-blade
screwdriver to insert or remove wire.
Wire
9-10mm
For reliable connection,
make sure that exposed
wire is not too short.
to "OFF", check that the UPS is completely stopped, and then set
with the outlet box does not function unless user settings menu item §3.20 "Enabling and
e t t i n g s
e t t i n g s
on the back panel of the UPS to "OFF", disconnect the
② Connect
connection cable
User Settings Guide
Connection cable
(supplied with outlet box)
Outlet box
③ Insert into one of the UPS
outlets
on the back
MAIN MCCB
User Settings Guide to "Enabled".
.
MAIN MCCB