§
1
8
.
5
L
A
N
I
n
t
e
§
1
8
.
5
L
A
N
I
n
t
e
Use the LAN interface card to perform UPS power management and computer shutdown.
When you use the LAN interface card, the optional "SANUPS SOFTWARE" is required. This software
provides network support, and is separate from the power management software supplied on the CD-ROM.
For detailed information about connections and settings, refer to the
interface card and the SANUPS SOFTWARE.
UPS
Network configuration for system using LAN interface card
Equipment you will need
LAN interface card
Connection procedure
① Insert the LAN interface card into the option card slot on the back panel of the UPS.
② Using the LAN interface card communications cable, connect the "CARD I/F" connector of the UPS to
the "UPS" connector of the LAN interface card.
User settings
Set the Interface setting to "Workstation" (default setting). For details on the setting procedure,
see §3.5 "Setting PC Interface" in the
Note
LAN interface card and the following two functions cannot be used simultaneously.
Using the UPS control software by connecting the supplied communication cable.
Using LAN interface card.
r
f
a
c
e
C
a
r
d
r
f
a
c
e
C
a
r
d
Communications cable for LAN
interface card
(Supplied with LAN interface card)
User Settings Guide
Instruction Manual
HUB
Power management software
SANUPS SOFTWARE
※
One SANUPS SOFTWARE license is
required for each computer that uses
the software.
① Insert the LAN interface card
into the option card slot.
② Connect the communications
cable.
.
Optional Equipment
of the LAN
Power line
LAN cable
62