Unit Settings And Wiring; External Control Signals - Sanyo Denki Sanups ASE-H series Instruction Manual

7.

Unit Settings and Wiring

！
CAUTION
◆ 7.1

External Control Signals

(1) External Interface Connector (CARD I/F)
This connector is specially designed for use with Sanyo card options (network
interface card and contact-interface card). If you wish to use this connector for other
devices, please contact your nearest sales representative.
(2) PC/Workstation Interface Connector (PC I/F)
① This connector can be used to control power by external communications from a
computer (such as a PC or workstation) using the optional SanGuard power
control software. Use the communications cable supplied with the UPS Power
Distribution Unit.
PC I/F Setting: W/S Mode (§12.2.1)
② Signals are supported by the UPS monitoring functions of network operating
systems (such as Netware and Windows NT).
By connecting a computer (PC or workstation) with the communications cable
supplied with the UPS Power Distribution Unit, automatic shutdown can be
controlled by the UPS services in Windows NT.
PC I/F Setting: Stand-Alone Mode (§12.2.1)
Precautions for using UPS monitoring functions
In the UPS Configuration window of the operating system, the Remote UPS Shutdown
setting should be set to Positive. Refer to the documentation for your network
operating system for details.
If the operating system does not support UPS monitoring functions (such as Windows
95 and 98), do not use the communications cable supplied with the UPS Power
Distribution Unit, as backup will not occur in the event of a power outage.
•Obtain the assistance of technically qualified personnel for wiring.
Incorrect wiring can result in electric shock, injury or fire.
•Make sure the input and output terminals and external control plugs
are firmly connected. A loose connection can cause smoke or fire.
•Make sure the ground terminal is connected to earth ground.
Otherwise, there is danger of electric shock.
- 13 -