Windows 2000/Xp/Server 2003 - Sanyo Denki SANUPS E11A102U-J Instruction Manual

§ 1 7 .

2 Windows 2000/XP/Server 2003

§ 1 7 . 2
To make UPS settings, log in as a user with Administrator privileges.
① Select the "Power Option Properties" icon in the Control Panel, and then click the "Select..." button in the
UPS tab.
② Select "Generic" in the "Select manufacturer" list, select "Custom" in the "Select model" list, and then click
"Next".
③ Make the settings shown in the following figure, and then click "Finish".
(Select the "Positive" option before clearing the check from the UPS Shutdown check box.)
A
B
C
No. Item
A Power Fail/On Battery
B Low Battery
C UPS Shutdown
Click Select...
Specifies that a warning message should be displayed according to the settings in
the "UPS Service" section.
Specifies that the OS shutdown should begin on reception of a UPS low battery
signal.
Clear this check box.
Using Standard OS UPS Services
Note
Even if you enable "UPS Shutdown", the UPS
will not shut down automatically after
Windows 2000/XP/Server 2003 shutdown.
If you need automatic UPS shutdown, use the
optional power management software.
Description
50