Lattice Semiconductor MachXO3-940 User Manual page 22

MachXO3-9400 Development Board
Evaluation Board User Guide
Table 5.10. Raspberry Pi JP3 Header Pin Connections (continued)
JP3 Pin Number
38
39
40
Notes:
*
3.3 V power is supplied from Raspberry Pi board.
** 5 V power can come from either the Raspberry Pi board or the MachXO3-9400 development board when jumper JP7 is installed.
When jumper JP7 is not installed, both boards need their own 5 V power.
© 2017 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal.
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
22
Signal Name
RASP_IO20
GND
RASP_IO21
MachXO3 Ball Location
Y2
—
Y3
FPGA-EB-02004-1.0