2
Attach the calibration ROM to the Sensor Head.
l
ZW-7000 Series
Attaching the Strap to Protective Cap
1
Attach the supplied strap to the protective cap.
l
ZW-7000 Series
Important
• If you do not use the protective cap, store the cap.
• When attaching the protective cap with its strap to the fiber cable, be careful so as the protective cap or strap do not
catch when you thread it.
• When removing the fiber cable from the Controller, make sure its protective cap is attached.
Leaving the cable unprotected can let dirt get on the end surface and cause performance deterioration.
Connection of Fiber Cable and Calibration ROM
Connect the fiber connector of Sensor Head to the fiber adapter of Sensor Controller.
1
Remove the Protective cap of Fiber cable.
l
ZW-7000 Series
26
Basic Operations for Displaying Measurement Results
l
ZW-5000 Series
l
ZW-5000 Series
l
ZW-5000 Series
ZW-7000/5000
User's Manual