Omron ZW-7000 Series User Manual page 218

Steps Key operation
14
15
16
17
18
19
20
21
22
216
Setting Measurement Items
Display Description
Select "PARAMn" for the parameter type.
Press the
key.
Set the parameter to "-1".
The current setting value is displayed on the sub-display.
Press
blinks.
To edit numerical values, use the
Input "-1", then press the
Press the
Select "PARAM.X" for the parameter type.
Press the
key.
Set the parameter to "TASK1".
The current setting value is displayed on the sub-display.
Press
Select "TASK1" and press the
Press the
Select "PARAMY" for the parameter type.
Press the
key.
Set the parameter to "TASK2".
The current setting value is displayed on the sub-display.
Press
Select "TASK2" and press the
Press the
/ keys to select "PARAM.N" and press the
key to enter the editing mode, and the sub-display
/
key.
key to return to the previous menu.
/ keys to select "PARAM.X" and press the
/ key to enter editing mode and the sub-display blinks.
key.
key to return to the previous menu.
/ keys to select "PARAM.Y" and press the
/ key to enter editing mode and the sub-display blinks.
key.
key for two seconds to enter the RUN mode.
/ / keys.
ZW-7000/5000
User's Manual