Omron ZW-7000 Series User Manual page 152

Performing Hold with a Key Input
The TIMING/RESET inputs can be held on the Sensor Controller by setting as follows.
Item Setting item
Sensor settings Timing/Reset key input
Setting the Hold Mode p.144
 Multi-view explorer
→ Edit pane
1
Set the operating mode to the FUNC mode.
3-2 Switching operation modes p.90
2
Select ON/OFF from [Key input mode(Timing
and Reset)].
Note
The timing/reset key input can also be set by the operating keys on the Sensor Controller.
Performing Hold with a Key Input p.227
150
Setting the Output Conditions
Setting value
OFF (default value)/ON
: [System] (double-click)
: [Sensor Settings] icon (
Description
Enables TIMING and RESET key inputs from the
Sensor Controller.
)
ZW-7000/5000
User's Manual