Omron ZW-7000 Series User Manual page 111

When the number of loggings reaches 2,000,000, past logging data is overwritten and logging continues
on the latest data.
2
Set the output conditions of internal logging data.
Set the conditions for the external output using the non-procedural command LO.
Item Setting item
Internal logging Output data
setting format
Note
For the response format of LO commands according to the output data format, refer to following page.
"5-1 Connecting by No-protocol Communications" described in Displacement Sensor ZW-7000/
5000 series Confocal Fiber Type Displacement Sensor User's Manual for Communications Settings
(Z363)
ZW-7000/5000
User's Manual
Setting value Description
ASCII (default value)/ Select the output format for outputting internal logging data.
Binary
Performing internal logging
109