Copying The Bank Settings - Omron ZW-7000 Series User Manual

Copying the Bank Settings

Copy the selected bank setting to another bank.
Copying the Bank/System Settings p.166
As an example, here is an explanation of the procedure for copying the BANK1 setting to BANK4.
Operating procedure
Steps Key operation
1
2
3
4
5
6
236
Setting the Banks
Display Description
Press and hold the
mode.
Press the
Press the
key.
Select "BANK1" as the bank setting to be copied.
"FROM" is displayed on the main display and the current setting
value is displayed on the sub-display.
Press
Select "BANK1" and press the
Select "BANK4" as the target to copy the bank setting.
"TO" is displayed on the main display and the current setting value is
displayed on the sub-display.
Press the
display blinks.
Select "BANK4" and press the
Press the
key for two seconds to enter the FUNC
/ key to select BANK, then press the
/ keys to select "BK.COPY" and press the
/ key to enter editing mode and the sub-display blinks.
key.
/ keys to enter the editing mode, and the sub-
key.
key for two seconds to enter the RUN mode.
key.
ZW-7000/5000
User's Manual