Clearing the Bank Settings
Clear (initialize) the setting of the currently selected bank.
Clearing the Bank Settings p.168
Important
Operations on the Sensor Controller do not initialize system settings and settings displayed in RUN mode.
Operating procedure
Steps
Key operation
1
2
3
4
5
238
Setting the Banks
Display
Description
Press and hold the
mode.
Press the
Press the
key.
"OK/CAN" is displayed on the sub-display.
Press the
cancel.
Press the
key for two seconds to enter the FUNC
/
key to select BANK, then press the
/
keys to select "BK.CLR" and press the
key to clear the settings or the
key for two seconds to enter the RUN mode.
key.
key to
ZW-7000/5000
User's Manual