Omron ZW-7000 Series User Manual page 104

Item
TriggerStartObject
TriggerStartConditions
TriggerStartValue1
TriggerStartValue2
TriggerStartDelay
TriggerEnd
TriggerEndType
TriggerEndObject
TriggerEndConditions
TriggerEndValue1
102
Saving measured values in a file
Output items
OUT1
OUT2
OUT3
OUT4
TIMING
ZERO
BUSY
ENABLE
HIGH
PASS
LOW
TASKSTAT
LOGGING
LOGSTAT
LOGERR
STABILITY
RESET
BUFFER_ERR
EqualTo
NotEqualTo
AndMore
MoreThan
LessThan
AndLess
True (rising)
False (falling)
-999.999999 to 999.999999 mm
-999.999999 to 999.999999 mm
-999.999999 to 999.999999 mm
True
False
IO
DataSlope
DataWindowIn
DataWindowOut
DataSize
OUT1
OUT2
OUT3
OUT4
TIMING
ZERO
BUSY
ENABLE
HIGH
PASS
LOW
TASKSTAT
LOGGING
LOGSTAT
LOGERR
STABILITY
RESET
BUFFER_ERR
EqualTo
NotEqualTo
AndMore
MoreThan
LessThan
AndLess
True (rising)
False (falling)
-999.999999 to 999.999999 mm
Description
Indicates the target data for the trigger start condition.
Indicates the trigger start condition.
EqualTo: =
NotEqualTo: ≠
AndMore: ≥
MoreThan: >
LessThan: <
AndLess: ≤
True: Rising
False: Falling
Indicates the judgment value for the trigger start condition.
For data window (in/out), indicates the lower limit.
Indicates the judgment value for the trigger start condition.
For data window (in/out), indicates the upper limit.
Indicates the delay time for the trigger start condition.
Indicates whether the trigger end condition is "Enabled" or
"Disabled".
Indicates the trigger end condition.
IO: I/O result
DataSlope: Data slope
DataWindowIn: Data window (in)
DataWindowOut: Data window (out)
DataSize: Number of data points
Indicates the target data for the trigger end condition.
Indicates the trigger end condition.
EqualTo: =
NotEqualTo: ≠
AndMore: ≥
MoreThan: >
LessThan: <
AndLess: ≤
True: Rising
False: Falling
Indicates the judgment value for the trigger end condition.
For data window (in/out), indicates the lower limit.
ZW-7000/5000
User's Manual